Canon IMAGERUNNER 5075 Reference Manual page 37

3
The screens shown below are displayed while the system
software is loading.
● If login authentication by a login service (SDL (Simple Device Login)
or SSO (Single Sign-On)) is not set, and an application other than
MEAP is selected as the initial function in Common Settings (from
the Additional Functions screen):
❑
The Start Up screen is displayed until the machine is ready to scan.
If a message is displayed on the touch panel display, proceed to step 4.
❑
The screen below is displayed when the machine is ready to scan.
The machine is ready to scan in approximately 30 seconds after the screen
above appears.
Main Power and Control Panel Power
1
1-17