Canon IMAGERUNNER 5075 Reference Manual page 126

NOTE
•
The Z-folded areas are as shown in the illustration below.
3
•
Z-fold paper is output to tray B or C, even if tray A is selected in Tray Designation in
Common Settings (from the Additional Functions screen).
•
The finishing modes available when the Z-Fold mode is set differ according to the paper
size, and are as follows.
- LGL/LTRR: No Collating
- 11" x 17": No Collating, Collate, Offset Collate, Group, Offset Group, Staple, Hole
•
If paper that has been Z-folded is included in the output, the sheets may not be aligned
when output.
3-24
Finisher-AD1/Saddle Finisher-AD2/Puncher Unit-AT1/Document Insertion/Folding
Unit-F1/Document Insertion Unit-E1
Punch
Platen Glass
Feeder
Z-folds
Z-folds