Canon IMAGERUNNER 5075 Reference Manual page 271

● To automatically search for destinations:
❑
Press [Auto Search/Register].
❑
Press [Auto Search Start].
Press [-] or [+] to set the search depth (how many routers to search).
NOTE
•
Since searching uses SLP (Service Location Protocol), machines behind a router
will not be detected if the router is set to restrict passing with the SLP protocol.
•
If any of the following is true for the destination machine, you cannot search the
destination.
- The main power is turned OFF
- The destination machine is not connected to the network
- Every function in Receive Restriction for Each Function under <Receiving
Settings> in Device Information Delivery Settings is set to 'On'
❑
Select the destination ➞ press [OK].
To select all of the destinations, press [Select All]. However, if a destination is
selected, this key changes to [Clear Selection].
NOTE
•
You can cancel a selection by selecting the destination again.
•
To cancel all destinations, press [Clear Selection]. ([Clear Selection] changes to
[Select All].)
3
Press [Done].
Specifying Device Information Delivery Settings
6
6-41