Rinsing The Machine; Rinsing The Milk System; Cleaning The Milk System - Jura ENA Micro 90 Instructions For Use Manual

Hide thumbs Also See for ENA Micro 90:
Table of Contents

Advertisement

5 Maintenance

Rinsing the machine

Precondition: 
READY
T Place a receptacle under the dual spout.
T Press and hold the Rotary Switch until
RINSE
appears.
T Press the Rotary Switch to enter the
program item.
M-CLEAN
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to initiate the rinse
operation.
RINSING
, the system rinses itself. The
operation stops automatically.
READY

Rinsing the milk system

After each milk preparation, the ENA prompts you
to perform a milk system rinse.
READY
Precondition: 
T Place a receptacle under the dual spout.
T Press the Rotary Switch to start milk system
rinsing.
RINSING
, the milk system is rinsed. The
rinse stops automatically.
on the display.
20
is displayed.
RINSE
is
/
M-RINSE
is displayed.
READY
appears

Cleaning the milk system

To ensure that the milk system in the dual spout
always works properly, you must clean it daily
when you have been preparing milk.
J
WARNING
Non-recommended cleaning agents will not
optimally remove milk residues. This may cause
the cappuccino frother to become blocked and fly
off the machine. Discharge of hot steam.
T  Use only original JURA milk system cleaner.
J
WARNING
Harmful and irritating cleaning agent. Harmful if
swallowed. Irritating to eyes and skin.
T  Keep children AWAY.
T  Avoid contact with skin and eyes.
T  After contact with skin, wash immediately
with plenty of water. In case of skin irritation,
seek medical advice.
T  After eye contact, immediately flush eyes
with plenty of water and seek medical
advice.
T  If swallowed, rinse mouth immediately and
drink large quantities of water. Do not
induce vomiting. Seek medical advice
immediately and show label.
E JURA milk system cleaner is available from
specialized dealers.
E To clean the milk system, use the container
supplied.
T Press and hold the Rotary Switch until
RINSE
appears.
T Press the Rotary Switch to enter the
program item.
M-CLEAN
T Press the Rotary Switch to start milk system
cleaning.
AGENT FOR M-CLEAN
T Remove the milk pipe from the milk
container or carton.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents