Descaling The Water Tank; Cleaning The Bean Container - Jura ENA Micro 90 Instructions For Use Manual

5 Maintenance
T Remove the water tank, rinse thoroughly, fill
with fresh, cold water and reinsert.
PRESS ROTARY
T Press the Rotary Switch.
DE-SCALING
dual and hot-water spout.
The operation is interrupted,
TRAY .
T Empty the drip tray and coffee grounds
container and reinsert them.
READY
E If the descaling operation stops
unexpectedly, rinse the water tank
thoroughly.

Descaling the water tank

Limescale deposits may form in the water tank. To
ensure correct function of the machine, descale
the water tank from time to time.
T Remove the water tank.
T If you use a CLEARYL Blue filter cartridge,
remove it.
T Completely fill the water tank and dissolve
3 JURA descaling tablets in it.
T Leave the water tank with the descaling
solution for several hours (e.g. overnight).
T Empty the water tank and rinse thoroughly.
T If you use a CLEARYL Blue filter cartridge,
reinsert it.
T Fill the water tank with fresh, cold water and
reinsert it.

Cleaning the bean container

Coffee beans may be covered with a slight oil film
which remains on the walls of the bean container.
These traces may negatively affect the coffee
result. For this reason clean the bean container
from time to time.
Q T Press the On/Off button to switch the
machine off.
T Disconnect the power plug.
T Remove the bean container cover.
26
, water flows out of the
EMPTY
T Remove the coffee beans with a vacuum
cleaner.
T Clean the bean container with a soft, dry
cloth.
T Fill the bean container with fresh coffee
beans, then close the bean container cover.