Setting The Water Hardness; Automatic Switch-Off; Unit For Amount Of Water - Jura ENA Micro 90 Instructions For Use Manual

4 Permanent settings in programming mode
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to enter the
program item.
nnnnnnkkkk
(Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK
, the coffee strength is now set.
FLAVOUR
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to exit the program
item.
PRODUCT
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to exit programming
mode.
READY

Setting the water hardness

E If you are using the CLEARYL Blue filter
cartridge and have activated it in
programming mode, you will not be able
to adjust the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
Precondition: READY
T Press and hold the Rotary Switch until
RINSE
appears.
T Turn the Rotary Switch until
is displayed.
T Press the Rotary Switch to enter the
program item.
16°dH (Example)
T Turn the Rotary Switch to change the
setting.
18
FLAVOUR
EXIT is
EXIT
is
is displayed.
HARDNESS
is T Press the Rotary Switch to confirm the
setting.
OK
, the water hardness is now set.
HARDNESS
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to exit programming
mode.
READY

Automatic switch-off

By instructing your ENA to automatically switch
itself off, you can cut down your energy
consumption. If this function is activated, your ENA
switches off automatically after the preset time
following the last action on the machine.
The automatic switch-off can be set to between
15 minutes and 9 hours.
READY
Precondition:
T Press and hold the Rotary Switch until
RINSE
T Turn the Rotary Switch until
is displayed.
T Press the Rotary Switch to enter the
program item.
2 HRS (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK , the switch-off time is now set.
OFF AFTER
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to exit programming
mode.
READY

Unit for amount of water

You can change the unit for the amount of water
from 'oz' to 'ml'.
EXIT
is displayed.
appears.
OFF AFTER
EXIT
is
is