Goodmans 4160AV Instruction Manual page 4

C O N T R O L S
On the main unit
Remote control
buttons see page 3.
5
Turn system power ON(stand-by).
Press this button to turn the unit on from standby.
UBS(Ultra Bass Sound)
Press this button to enhance the low frequency
(Bass) sounds.
Mute the audio output.
Press again to restore audio output.
To show the current time in the unit's display.
GEQ.
Press this button to add sound effects to the audio
output.
Headphone socket.
When inserting a set of headphones the sound from
the speakers will be turned off.
Direct function buttons
Press tape to select tape 1, press again to select tape 2.
Press tuner to select tuner, press again to change the band.
Press AUX 1/2 to listen to sound from external equipment.
Press CD to listen to an inserted CD.
Tune in stations, to set values in
programming, to fast reverse or advance
tape and CD.
Start playback or to select station presets.
Stop playback and recording or clear
values and functions.
Press to pause playback/recording of Tape
/CD or to set/enter a value when
programming a CD or setting clock/timer.
Place this sound system
horizontally on a flat, steady base and in a position so
that air can circulate around it for ventilation.
away from humidity and heat, magnetic fields, such as
those from loudspeakers etc., and with no heavy objects
placed on top.
On the main unit
To select timer setting and to activate / deactivate timer stand-by.
DISPLAY / DEMO : to switch between the
system's display and a display demonstration.
To view the demonstration of this system press the
DEMO/DISPLAY button shortly. To change graphic
equalizer display, press and hold the DEMO/DISPLAY button
for more then 1 sec and you can select your favorite display
sequentially.
Direct access to one of the three discs that can be loaded
into the CD tray.
Select the next disc in the CD tray.
Tape compartment 1 Tape compartment 2 for playing tapes in both directions
(see page10 PLAY MODE) and recording tapes.
for playing tapes.
Select the TAPE 2 playback mode
" " will be shown in the display for single side playback only,
" " will be shown in the display for playback of both sides once only, or
" " will be shown in the display for repeated playback of both sides.
To start tape recording.
To dub a tape at high or normal speed with synchronised start of both,
playing and recording tapes.
To dub a CD with synchronised start of disc and tape.
C O N T R O L S
Open or close the disc compartment to
load / unload CDs.
To set the volume level.
6