Goodmans 4160AV Instruction Manual page 3

Please note, the instructions given in this instruction manual refer mainly to the remote
but the main functions buttons are also available on the front of the machine.
C O N T R O L S
Press the POWER button or FUNCTION buttons (TAPE, TUNER, AUX1/2, CD ) to
turn on the power.
The Remote Control
3
Power on (stand-by).
Press repeatedly to select tape, tuner, AUX, or CD player.
To set the volume level.
To tune in stations, to set values in programming, to fast reverse or advance
tape and CD.
Start CD playback or select station presets.
Stop or cancel values and functions.
Set a programm for CD playback.
Select random playback.
Select repeat playback.
Direct access to each of the CDs loaded.
Display the current time.
Set the period after which the unit will turn off.
Pause playback/recording of CD or tape.
Set the time for the unit to turn on also turn timer on/off.
Select FM or MW radio.
Add sound effects to the sound output.
Mute (on / off) the volume for a while, e.g. during a telephone call.
Select FM mono for weak stereo reception, or TAPE 1/2.
Bass enhancement (on / off), see page 4.
Sound Control
On the
Stereo
Volume control
Rotate the volume control or press the volume buttons on
the remote to adjust the volume.
(MAX, VOL 28 ~ VOL 1, MIN).
Mute
Press the mute button on the remote control or main unit
to mute the sound. Press again to return the sound to the
previous level.
GEQ
Press this button on the remote control to add sound
effects to the audio output.
Demo/Display
Press this button on the main unit to switch between
normal display mode and a demonstration shown on
display.
Ultra Bass Sound
Press this button on the remote control or main unit to
enhance the low frequency (Bass) sounds.
C O N T R O L S
On the
remote control
4