Table Tilt; Foot Brake - Grizzly G0817 Owner's Manual

Table Tilt

T
U
Figure 8. Table tilt controls.
S. Table Tilt Indicator: Shows table tilt angle.
T. Table Tilt Lock Lever: Secures table tilt
position on trunnion. Must be loosened before
table tilt can be adjusted.
U. Trunnion w/Table Tilt Scale: Functions as
a tilting base for table. Graduated in degrees
from 5° left–45° right for setting bevel angle.
V. Table Tilt Adjustment Lever: Adjusts angle
of table tilt using a rack-and-pinion system.
W. Positive Stop: Allows for quickly returning
table to a calibrated 0° setting after it has
been tilted to the right (refer to Page 47 for
more information).
-6-
S
V W
Lower Wheel Adjustment
X
Figure 9. Lower wheel adjustment controls.
X. Lower Wheel Adjustment Hub: Adjusts
position of lower wheel to upper wheel if
coplanar adjustments become necessary
(refer to Page 68 for more information).
Note: The wheels are factory-set to be
coplanar, so we strongly recommend that
you avoid making adjustments here unless it
becomes absolutely necessary.

Foot Brake

Figure 10. Location of foot brake.
Y. Foot Brake: Stops blade wheels and turns
motor OFF.
Important: After the foot brake is pressed,
the machine can be restarted by pressing the
ON button. The Emergency Stop button does
not have to be reset.
Model G0817 (Mfd. Since 05/16)
Y