Grizzly G0817 Owner's Manual page 25

10. Install adjustable handle onto fence base with
(1) 8mm flat washer, and thread into fence
base guide plate (see Figure 31).
Flat Washer
8mm
Adjustable
Handle
Figure 31. Fence base adjustable handle and
guide plate installed.
11. Place fence base on fence rail with lock lever
raised up. Push lock lever down to secure
fence in place (see Figure 32).
Rail
Figure 32. Fence base installed on fence rail.
Model G0817 (Mfd. Since 05/16)
Fence Base
Guide Plate
Fence Base
Lock Lever in
Down (Locked)
Position
12. Mount fence face to fence base, sliding
T-channel (see Figures 33–34) around fence
base guide plate (see Figure 31).
— For normal workpieces, mount fence in
vertical position, as shown in Figure 33,
then rotate fence base lock lever to secure.
— For thin workpieces, mount fence in hori-
zontal position, as shown in Figure 34,
then rotate fence base lock lever to secure.
T-Channel
Fence Face
Lock Lever
Figure 33. Installing fence in vertical position.
Fence Face Fence Face
Lock Lever
T-Channel
Figure 34. Fence installed in horizontal position.
Fence Face
-23-