THRUSH AIRCRAFT INC - T660 TURBO THRUSH
9.
Fuel inlet manifold adaptor dump tube at front fireseal.
10.
Fuel inlet hose at the oil-to-fuel heater.
11.
Fuel purge hose at the high pressure fuel pump.
12.
Oil pressure line at engine.
13.
Disconnect the engine overboard breather hose.
14.
High-pressure fuel pump drain.
15.
Fuel pressure line from rear of oil to fuel heater.
16.
Torque indicating systems hoses at aft fireseal.
I.
Disconnect the electrical leads and connector plugs at the locations noted. Remove
electrical harness clamps, as necessary, to allow engine removal.
Tag or identify all electrical leads and connector plugs. Note
harness clamp locations to facilitate and ensure correct
installation. Cap all plugs and receptacles to prevent
contamination.
1.
ITT harness at the T5 terminal block.
2.
Overspeed governor prop test solenoid.
3.
Prop beta micro switch.
4.
Np tachometer generator.
Effective: 12/17/03
AIRCRAFT MAINTENANCE MANUAL
* NOTE *
4 – 8