Thrush Aircraft S2R–T660 Maintenance Manual page 38

10. Check counterweight bolts for safety.
11. Check ring rod-end jam nuts.
12. Re-install spinner. Rotate prop and check alignment of low pitch
stop collar. (.010 max. runout)
13. Check carbon block side clearance.
New Block: .001 "-.002" clearance
Used Block: .010"-max allowed
14. Check beta control valve clevis slot end for alignment with face
of cap nut.
15. Check fuel governor reset arm for hitting stop.
16. Check prop governor control levers for hitting stop in low and
high pitch.
17. Check reversing cable housing jam nuts and pins for safety and
condition of housing.
18. Inspect overspeed governor.
2 - 20
THRUSH AICRAFT INC - T660 TURBO THRUSH
AIRCRAFT MAINTENANCE MANUAL
X
X
X
X
X
X
X
X
X
Effective: 01/10/05
R1