THRUSH AIRCRAFT INC – T660 TURBO THRUSH
Wing
Aileron (Each)
Flaps (Each)
Stabilizer
Elevators
Elevator Tabs (Each)
Fin
Rudder
SUPPLIER FURNISHED COMPONENT MANUALS
PT6A-67AG
PT6A-60AG
PT6A-45A, PT6A-45B, PT6A-
45R
Propeller (B5P10120S)
The fuselage comprises a welded tubular steel frame, fiberglass hopper, and detachable skins. An
overturn structure forms an integral part of the fuselage frame. The frame structure, fittings,
bushings, brackets, and so forth are fabricated from 4130 chrome-moly seamless steel tubing.
As a corrosion preventative, hot linseed oil is pumped throughout the entire welded structure. On an
average, 12 gallons are pumped into the frame and 11 to 11 1/2 gallons drain out, leaving a
residual coating on all members. The exterior of the frame is sandblasted, etched, and primed,
which is followed by two coats of polyurethane paint that is resistant to chemical reaction. The
Effective: 12/17/03
AIRCRAFT MAINTENANCE MANUAL
AREAS
405.0 Square Feet
23.40 Square Feet
26.70 Square Feet
39.30 Square Feet
20.40 Square Feet
1.30 Square Feet
10.59 Square Feet on T660-109 and subsequent
15.55 Square Feet on T660-109 and subsequent
MANUAL
Maintenance Manual
Vol. I & II
Parts Manual
Maintenance Manual
Vol. I & II
Parts Manual
THIS SPACE INTENTIONALLY LEFT BLANK.
Maintenance Manual
Vol I & II
Parts Manual
Owner's Manual
AIRCRAFT STRUCTURES
FUSELAGE
PART #
3036132
3036134
3034342
3034344
3027042
3027044
139
1 - 4