Configure The Settings Relating To Maintenance [Maintenance]; Check The System Information Such As The Version [System Information]; Confirm The Hard Disk Drive Information [Hdd Information] - Panasonic WJ-NX400K Operating Instructions Manual

[Setup via recorder's main monitor]

Configure the settings relating to maintenance [Maintenance]

The version of the recorder and disk information is displayed, and the settings relating to hard disk drives can
be configured on the setup menu - the "Advanced setup" menu - the "Maintenance" page. It is also possible to
initialize the setup data of the setup pages, check the system logs and register the license on this page.
The "Maintenance" page has [System information], [HDD information] and [System management] tabs.
Check the system information such as the version
[System information]
The version (of the software and hardware), serial number, network information (MAC address, IP address, line
speed), temperature inside the recorder and highest temperature inside the recorder, etc. are displayed on this
tab.

Confirm the hard disk drive information [HDD information]

Capacity of the hard disk drive and the running time of this product or the extension unit (EXT1 ~ EXT5), time
range of the recorded images, etc. will be displayed.
Note:
• System information will not be updated while the
"Maintenance" page is being displayed.
• Besides the setting value for "Line speed", the
actual line speed will be displayed in "( )".
Note:
• HDD information will not be updated while the
"Maintenance" page is being displayed.
■ Extension unit information
Displays the version information of the extension unit,
temperature information and recovery progress informa-
tion. Click [View >] button to display the following screen.
62