Register Camera Preset Positions; Move Camera Preset Positions - Panasonic WJ-NX400K Operating Instructions Manual

[Operation via recorder's main monitor]

Register camera preset positions

Register the current camera position as a preset position. The preset positions can be registered only when
using a camera supporting the preset position function.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
→ The "Camera control [Advanced]" panel will be
displayed. (☞ Page 113)
Step 3
Move the direction of the camera to the position to be
registered using the panning/tilting function of the
camera. (☞ Page 115)

Move camera preset positions

Move the camera to the registered preset position. It is necessary to register preset positions in advance.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
→ The "Camera control [Advanced]" panel will be
displayed. (☞ Page 113)
Step 3
Click the [▲]/[▼] button in the [Position] box to select
a preset number. Select a preset number (0 - 256) to
be registered. Selecting preset position number 0 will
move the camera to home position.
Step 4
Click the [▲]/[▼] button in the [Position] box to select
a preset number. Select a preset number (1 - 256) to
be registered.
Step 5
Click the [Regist] button.
→ The camera direction will be registered to the
selected preset position number.
Step 4
Click the [Call] button.
→ The camera direction will move to the preset posi-
tion corresponding to the selected preset position
number.
Note:
• A non-registered preset number can be selected,
but the camera will not move even if the [Call] but-
ton is clicked.
118