Cancel The Alarm Action; Cancel The Error Action - Panasonic WJ-NX400K Operating Instructions Manual

[Operation via PC web browser]

Cancel the alarm action

To cancel the alarm action manually, click the [ALM] button in the status display area.
→ The alarm action will be canceled. The event recording will stop and return to the operational status just
before the event occurred.

Cancel the error action

When an error (trouble) occurred on the recorder, the recorder will take the error action (a series of actions that
notifies of the error occurrence). An error display window providing information on the error that occurred will
be displayed on the web browser. To cancel the error action manually, close the error display window, and click
the [ERR] button in the status display area.
→ The error action will be canceled.
Note:
• When an error occurs, take remedial action by following the instructions displayed on the error log panel
(☞ Page 136). The error indicator on the front of the recorder will go off when the cause of the error has
been eliminated.
• The [ERR] button is continuously displayed even if the cause of the error is automatically resolved. Click the
[ERR] button to turn it off.
169