Panasonic WJ-NX400K Operating Instructions Manual page 33

[Setup via recorder's main monitor]
[Advanced setup] tab
Set the connection method of the camera.
Clicking the [Setup >] button of "Connection method" under the [Advanced setup] tab displays the setup screen.
■ Connection method
[Connection method]
Set the connection method for each camera.
RTP: Connects with the RTP.
RTSP: Connects with the RTSP.
Internet mode: Connects in the Internet mode.
Note:
• The connection method will become valid when the
camera is the i-pro series and the compression type
is H.264/H.265.
33