Panasonic WJ-NX400K Operating Instructions Manual page 50

[Setup via recorder's main monitor]
[Primary server address]
[Secondary server address]
When the DNS is used, select the IP addresses for
the primary and secondary DNS server. Enter in the
same way as the IP address.
Default: 0.0.0.0
[Domain name]
Enter the domain name of the recorder. The first char-
acter of the domain name should be an alphabetical
character.
Enter 3 to 63 alphanumeric characters including
hyphens (-) and periods (.).
Default: localdomain
■ DDNS Setup
Select the DDNS service to determine whether or not
to use DDNS.
Off: Does not use the DDNS function.
Viewnetcam.com: Uses the "Viewnetcam.com"
service.
Default: Off
Note:
• "Viewnetcam.com" is a Dynamic DNS service
designed for use with Panasonic Network
Cameras. Refer to the "Viewnetcam.com" website
(http://www.viewnetcam.com/) for further informa-
tion about the service.
When using the "Viewnetcam.com"
service
[Personal(Product) URL]
The URL of the camera registered for "Viewnetcam.
com".
When accessing the menu again after performing the
initial settings, the temporary URL will be displayed.
[Your account link]
The URL of the registration window for the "Viewnet-
cam.com" service will be displayed.
Register the information in the registration window to
enroll in the "Viewnetcam.com" service.
[Access interval]
Select the interval to access the "Viewnetcam.com"
service server to check the IP address and the host
name from the following.
10 min/ 20 min/ 30 min/ 40 min/ 50 min/ 1 h
Default: 1 h
50