Panasonic WJ-NX400K Operating Instructions Manual page 37

[Setup via recorder's main monitor]
Set up recording for individual cameras [Advanced recording setup]
Set up items such as the image capture size, frame rate and image quality for individual cameras.
Clicking the [Advanced >] button on the [Recording setup] tab will open the advanced setup page.
[Model]
The model number of the connected camera will be
displayed.
(Blank: Camera is not registered)
[Compression]
The compression method selected when registering
camera will be displayed.
[Image capture size]
Select a resolution for images to be recorded.
<When the aspect ratio is 4:3>
VGA(640×480)/ SVGA(800×600)/
SXVGA(1280×960)/ QXGA(2048×1536)/
5M(2560×1920)/ 12M(4000×3000)
<When the aspect ratio is 16:9>
HVGAW(640×360)/ HD(1280×720)/
FHD(1920×1080)/ WQHD(2560×1440)/
4KUHD(3840×2160)
<When the aspect ratio is 1:1>
1.6M(1280×1280)/ 4M(2048×2048)/
8M(2816×2816)/ 9M(2992×2992)
<When the aspect ratio is 9:16>
0.2M(360×640)/ 1M(720×1280)/ 2M(1080×1920)
Important:
• The available image capture sizes may differ
depending on the model of the camera and the
compression method.
Note:
• When configured to perform recording in high res-
olution and high quality, recording may sometimes
not be performed at the specified rate.
• Depending on the model of the camera, the cam-
era may reboot when the image capture size is
changed. The reboot will be detected as a com-
munication error, but that is not a malfunction.
[Rate] (Frame rate) (☞ Page 34)
Note:
• The 60 ips is available depending on the camera
model and settings of compression and image
capture size.
• The images of "60 ips (50 ips)" can be displayed
in one screen if a monitor compatible with
1920×1080 p/ 60 Hz (1920×1080 p/ 50 Hz) is used
as a main monitor. (The images on the main moni-
tor other than 1-screen and on the sub monitor
are displayed in "30 ips (25 ips)".)
[Quality] (Image quality) (☞ Page 35)
[Audio]
Select whether or not to record audio together with
images.
On: Audio will be recorded.
Off: Audio will not be recorded.
Default: Off
[Schedule]
Select a schedule in which the desired recording to
be performed is included.
Schedule1: Recording will be performed accord-
ing to the settings for schedule1.
Schedule16: Recording will be performed accord-
ing to the settings for schedule16.
Default: Schedule1
[Event]
Select the frame rate of the event recording.
1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 25 ips/ 30 ips/
(Same as the basic)
Default: Same as the basic
37