Panasonic WJ-NX400K Operating Instructions Manual page 68

[Setup via recorder's main monitor]
Execute functions for special maintenance and service [Other]
All logs can be saved on the USB medium (external storage device) or the date and time of the camera can be
synchronized with this product.
[Save maintenance data (to USB medium)]
Save all logs on the USB medium (external storage
device).
Saving of the logs will start by executing on the confir-
mation window displayed by clicking the [Execute >]
button.
Note:
• Do not operate the recorder with multiple USB
medium connected.
• Use the USB medium formatted in exFAT, FAT
(FAT 16) or FAT 32.
• USB medium recognized by this recorder can be
formatted by the recorder. Refer to page 144 for
the format procedures.
• USB medium with password authentication or
requiring a dedicated driver or with the encryption
function are not available.
• Usage time varies depending on the capacity of
the USB medium or the recording content. Retry
again later if you fail in operation.
[Synchronize the camera's time with this unit]
Time and date of all the registered cameras will be
synchronized with the clock of this product. The time
and date synchronization will be executed when the
setting is completed after executing on the confirma-
tion window displayed by clicking the [Execute] but-
ton.
[Synchronize the camera's settings with this unit]
Reconfigure the settings of all the registered cameras
based on the setting information of this product. The
time and date synchronization will be executed when
the setting is completed after executing on the confir-
mation window displayed by clicking the [Execute]
button.
Important:
• Since this setting will change the settings of all
cameras, please take an extra caution in case that
the settings of each camera are customized indi-
vidually.
[Acquire the SD backup data from camera]
Starts to acquire the image (SD memory data)
recorded on the SD memory card of the camera in
which the SD memory backup is set.
[Reboot this product]
Reboots the recorder.
[Boot this product in the board replacement mode.]
Used to replace the board.
Note:
• Contact your dealer for the board replacement.
[Clear the maximum temperature record information.]
Clears the highest temperature record information.
68