Cancel The Alarm Action - Panasonic WJ-ND300 Operating Instructions Manual

Cancel the Alarm Action

The alarm action will be performed when an event is detected.
To cancel the alarm action manually, do the following.
Screenshot 1
[ALARM RESET] will be displayed in the status display
area when an alarm occurs.
Suspend the Alarm Action
Configure the settings to not to perform the alarm action even when an event occurs. It is useful to suspend the
alarm action at an event occurrence such when maintaining the unit for a certain period.
Even though the alarm action is suspended, recording of images, event log recording and the preset action will be
performed.
Screenshot 1
The operating window will be displayed.
28
Step 1
Click the [ALARM RESET] button.
→ The alarm action will be canceled.
Step 1
Click the [ALARM SUSPEND] button.
→ The alarm action will be suspended.
The "ALARM SUSPEND" indicator on the front panel of
the unit will light.
Step 2
To release the alarm suspension, click the [ALARM
SUSPEND] button again.
→ The "ALARM SUSPEND" indicator on the front panel
of the unit will go off.