Image Output Window; Message Window; Network Device Finder - Dalsa QuickCam User Manual

71

Image Output Window

The Camera Output Window displays the camera's image output. You can move
the Camera Output Window anywhere within the program window.
Figure 3: Image Output Window displaying 8 Bit Test Pattern

Message Window

The Message Window provides camera feedback in the following forms:
Command
Message
History
Command
Error/Warning

Network Device Finder

The Network Device Finder Window displays all
detected cameras on the same sub-network.
03-032-10187-04
Purpose
Provides a list of all command responses from the camera to
the Spyder3 GigE Camera Control application.
Provides a list of all camera messages.
Provides a list of all commands sent to the camera. You can
also send ASCII commands through the Command window.
Refer to your camera's user's manual for a list of the available
ASCII commands.
Provides a list of all error or warning messages sent from the
camera to the Spyder3 GigE Camera Control application.
QuickCam User's Manul
DALSA corp.