Running Quickcam; Connecting, Detecting And Acquiring Images; Detecting A Camera - Dalsa QuickCam User Manual

QuickCam User's Manual

2.2 Running QuickCam

To run QuickCam:
1. On the Windows task bar, click the Start button, point to Programs
2.3 Connecting, Detecting and Acquiring
Images

Detecting a Camera

When you first open the QuickCam application, and after powering up the
camera, QuickCam automatically detects all cameras on the network and asks
you to set an IP address for each (or accept the suggested default). If you have
multiple cameras on your network, ensure you give each one of them a unique IP
address.
If you need to change the device's IP or name after initial setup, use the Network
Device Finder dialog box (menu bar: Configure
To access the advanced controls, right click on the device you want to configure.
03-032-10187-04
b)
Choose Install High Performance IP Device Driver to install the
QuickCam High Performance IP Device Driver.
If you are NOT using an Intel PRO/1000 adapter:
a)
On the Universal IP Filter Driver tab, click, Install Filter Driver.... This
button installs the QuickCam Universal IP Filter Driver on ALL network
adapters installed on the system that are using a network driver. This
excludes PRO/1000 adapters on which the QuickCam High
Performance Driver has been installed.
DALSA QuickCam DALSA QuickCam
Advanced Connection...).
8
DALSA corp.