Counter - Dalsa QuickCam User Manual

QuickCam User's Manual
Provides the recommended granularity for the value specified in the Target
Frequency
Recommended Multiplier
Provides the recommended multiplier for the value specified in the Target
Frequency
Recommended Divider
Provides the recommended divider for the value specified in the Target
Frequency
The output of the rescaler is considered an input for the GPIO LUT.
The labels for the output from the rescaler in the GPIO Control Block
programming languages depend on the LUT input configuration.

6.7 Counter

To configure the Counter, click the Advanced... button on the Exposure/GPIO
tab in the Camera Configuration dialog box and open the Device Features tab.
QuickCam has general purpose counter module. It simply maintains a count
value that can be increased, decreased, or cleared based on input signals. The
counter outputs two signals (which are inputs to the GPIO LUT)
03-032-10187-04
42
DALSA corp.