Touch Controller - Cisco MX series Getting Started Manual

Cisco TelePresence Video Systems

Introduction

Touch controller

Wake up the system
If there is no menu displayed on the Touch controller, tap the
display to wake up the system.
If the system doesn't wake up:
• Make sure the Touch controller is connected to the main
unit.
• Make sure the main unit is connected to power and
switched on.
If the system has just been switched on, wait a few minutes
to allow the system to start up.
For further instructions, read the installation guide and the
administration for your product.
For an overview of Touch controller features and use, see
How to use the Touch controller.
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
User interfaces Web interface On-screen setup assistant
25
Getting Started Guide
Touch Touch Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.