Provisioning - Cisco MX series Getting Started Manual

Cisco TelePresence Video Systems

Introduction

Provisioning

(When using a provisioning system)
If your system is automatically provisioned, the IP and provi-
sioning settings are automatically configured and the setup
assistant skips these steps.
Choose provisioning infrastructure
Choose one of the following supported on premise provision-
ing systems:
• Cisco UCM (Cisco Unified Communications Manager)
• Cisco UCM via Expressway
• VCS (Video Communication Server)
If you choose manual setup, you must register the system on
the system's web interface. Manual setup is only available on
the first time setup assistant.
If you wish to revisit these settings after the initial setup,
navigate to the gearwheel icon on the home screen, and select
System Information > Settings > Service
Change service.
NOTE: When you start up the SX10 or SX20 for the first time,
the setup assistant starts automatically.
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
User interfaces Web interface
activation. Select
On-screen setup assistant On-screen setup assistant
22
Getting Started Guide
Touch Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.