FRAMEIBODY PANELSIEXHAUST SYSTEM
SADDLE BAG BODY
GRAB RAILCENTER COVER
Remove the seat (page
3-51,
Remove the socket bolts, screws, washers and col-
lars.
Remove the grab rail center cover.
At installation, align the tabs o n the grab rail center
cover to the grooves o n the rear grab rails.
GRAB
RBLL
Remove the grab rail center cover (page 3-7).
Remove the following:
- Screws
-
Bolts/washers/collars
-
Bolts/collars/seat mount rubbers
Disconnect the saddle bag lock cable from the key
cylinder (left side only).
Remove the rear grab rails.
Installation is in the reverse order of removal.
SOCKET BOLTSIWASHERSICOLLARS
\
GRAB RAIL CENTER COVER
BOLTSICOLLARSISEAT MOUNT RUBBERS
BOLTS/WASHERS/
\
LOCK CABLE