Removing & Installing Body Components; Battery - Honda WW150 2018 Owner's Manual

Removing & Installing Body Components

Battery

Positive terminal
Battery
#
Removal
Make sure the ignition switch is in the
position.
Remove the battery cover.
1.
Unhook the rubber strap.
2.
Disconnect the negative - terminal from the
3.
battery.
76
Rubber strap
Negative terminal
(Off)
P. 77
2
Disconnect the positive + terminal from the
4.
battery.
Remove the battery taking care not to drop
5.
the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first. Make
sure that bolts and nuts are tight.
Make sure the clock information is correct after
the battery is reconnected.
The anti-theft alarm system will be deactivated if
the battery is disconnected. The system will remain
off when the battery is reconnected.
To activate the system, turn the ignition switch to
the (On) position once.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
P. 19
2
P. 67
2
P. 115