Main Stand; Side Stand - Honda NT700V Deauville Service Manual

FRAMEIBODY PANELSIEXHAUST SYSTEM
SIDE STAND
Remove the side stand switch (page
22-19).
Support the motorcycle securely using the main
stand.
Unhook the return spring.
Remove the pivot nut, bolt and side stand.
Installation is in the reverse order of removal.
At installation, apply grease to the pivot bolt sliding
surfaces.
TORQUE:
Side stand pivot bolt 10 N.m (1.0 kgf-m, 7 IbfW
Side stand pivot nut 29 N-m (3.0 kgf.m, 22 Ibf-ft)
MAIN STAND
Support the motorcycle securely using the side
stand.
Unhook the return springs.
Remove the bolt and main stand pivot.
Remove the main stand.
Installation is in the reverse order of removal.
At installation, apply grease to the pivot sliding sur-
faces.
TORQUE:
Main stand pivot bolt 12 N-m (1.2 kgf-m, 9 Ibf-ftl