Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the OFF
position.
Remove the seat.
1.
Remove the data link connector while
2.
pressing its tab from the battery cover.
3.
CMX500A/A2
Remove the air check connector while
pressing its tab from the battery cover.
Remove the connector holder and relay
4.
holders from the battery cover.
Release the wire harness from the guide
5.
on the battery cover.
P. 71
2
Relay holders
Battery
cover
Data link
connector
Air check connector
Connector holder
Wire
harness
Guide
CMX500A/A2
Tab
Tab
Continued
67