Honda NT700V Deauville Service Manual page 93

MAINTENANCE
Remove the oil filter cartridge using the special tool
and let the remaining oil drain out.
TOOL:
Oil filter wrench 07HAA-PJ70101
Coat a new 0-ring with oil and install i t to the oil fil-
ter cartridge.
Apply oil to the threads of a new oil filter cartridge.
lnstall the oil filter cartridge and tighten it to the
specified torque.
TOOL:
Oil filter wrench 07HAA-PJ70101
Remove the oil filter cartridge
and let the remaining oil drain
using
out.
the special tool
-
ter cartridge.
Apply oil to the threads of a new oil filter cartridge.
lnstafl the oil drain bolt with a new sealing washer
and tighten it to the specified torque.
TORQUE: 30 N.m (3.1 kgf-m, 22 Ibfsft)
Fill the crankcase with the recommended engine oil
(page 4-1 2).
OIL CAPACITY:
2.6 liters (2.75 US qt, 2.29 Imp qt) at draining
2.8 liters (2.96 US qt, 2.46 Imp qt) at filter change
3.2 liters (3.38 US qt, 2.82 Imp qt) at disassembly
Check the engine oil level (page 4-1 1).
Install the oil filler capldipstick (page 4-12).
Make sure there are no oil leaks.