Side Cover/Pilot Cover Removal/Installation - Honda NT700V Deauville Service Manual

FRAME/BODY PANELSIEXHAUST SYSTEM
SEAT
Open the left saddle bag using the ignition key.
Pull the lever and unlock the seat, then remove the
seat off.
Install the seat assembly by inserting its prongs
under the raised lip of the frame properly.
SIDE COVERIPIVOT COVER
REMOVAL/INSTALLATION
Be careful not
to
Remove the seat (page 3-5).
damage the side
Release the bosses on the side cover from the frame
grommets and groove of the middle cowl.
Remove the side coverlpivot cover by releasing its
fastener from the frame fastener and groove of the
middle cowl.
Install the side cover by inserting its bosses into the
frame grommets and groove of the middle cowl.
SEAT
\
PRONGS
\
I
LEVER
GROOVE
\
BOSSES