1.5 Agc; 1.6 Apc; 1.7 Adc; 1.8 Target Power - LG -T370 Service Manual

11.5 AGC
12.5 AGC
This procedure is for Rx calibration.
In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the
result window will show correction values per every power level and gain code and the same
measure is performed per every frequency.
12.6 APC 11 6 APC 11.6 APC
This procedure is for Tx calibration.
In this procedure you can get proper scale factor value and measured power level.
11.7 ADC
12.7 ADC
This procedure is for battery calibration. This procedure is for battery calibration
You can get main Battery Config Table and temperature Config Table will be reset.
11.8 Target Power
12.8 Target Power
BAND
GSM 850
EGSM 900
DCS1800
PCS 1900
LGE Internal Use Only
Description
Channel
Frequency 824.2 MHz
Max power 32.5 dBm
Channel
Frequency 880.2 MHz
Max power Max power 32.5 dBm 32 5 dBm
Channel
Frequency 1710.2 MHz
Max power 29.5 dBm
Channel
Frequency 1850.2 MHz
Max power 29.5 dBm
11. AUTO CALIBRATION
Low Middle
128 191
836.8 MHz
32.5 dBm
975 37
897.4 MHz
32.5 dBm 32 5 dBm
512 699
1747.6 MHz
29.5 dBm
512 661
1880 MHz
29.5 dBm
- 145 - Copyright © 01 LG Electronics. Inc. All right reserved.
12.AUTO CALIBRATION
High
251
848.8 MHz
32.5 dBm
124
914.8 MHz
32.5 dBm 32 5 dBm
885
1784.8 MHz
29.5 dBm
810
1909.8 MHz
29.5 dBm
Only for training and service purposes