LG -T370 Service Manual page 4

E. Notice of Radiated Emissions
This model complies with rules regarding radiation and radio frequency emission as defined by local regulatory p
agencies. In accordance with these agencies, you may be required to provide information such as the following to
the end user.
F. Pictures
The pictures in this manual are for illustrative purposes only; your actual hardware may look slightly different.
G. Interference and Attenuation
Phone may interfere with sensitive laboratory equipment, medical equipment, etc.Interference from
unsuppressed engines or electric motors may cause problems. unsuppressed engines or electric motors may cause problems
H. Electrostatic Sensitive Devices
Boards, which contain Electrostatic Sensitive Device (ESD), are indicated
by the sign. Following information is ESD handling:
• Service personnel should ground themselves by using a wrist strap when exchange system
boards.
• When repairs are made to a system board, they should spread the floor with anti-static mat
which is also grounded.
• Use a suitable, grounded soldering iron.
• Keep sensitive parts in these protective packages until these are used.
• When returning system boards or parts like EEPROM to the factory, use the protective
package as described.
LGE Internal Use Only
g g
ATTENTION
- 4 -
1. INTRODUCTION
2. INTRODUCTION
q y
Copyright © 01 LG Electronics. Inc. All right reserved.
Only for training and service purposes
y g y