9. CALIBRATION
C. AGC
This procedure is for Rx calibration.
In this procedure, We can get RSSI correction value. Set band GSM and press Start button the
result window will show correction values per every power level and gain code and the same
measure is performed per every frequency.
D. APC
This procedure is for Tx calibration.
In this procedure you can get proper scale factor value and measured power level.
E. ADC
This procedure is for battery calibration.
You can get main Battery Config Table and temperature Config Table
F. Setting
check com port and cable loss. Select automatic calibration item.
If you uncheck one item calibration will stop from the unchecked item. This is useful when you want to
process only one item.
- 99 -