Tx Test - LG -T370 Service Manual

10.3 Tx Test

11.3 Tx Test
1. "Non signaling mode" bar and then confirm "OK" text in the command line.
2. Put the number of TX Channel in the ARFCN
3. Select "Tx" in the RF mode menu and "PCL" in the PA Level menu.
4. Finally, Click "Write All" bar and try the efficiency test of Phone.
LGE Internal Use Only
10. STAND ALONE TEST
- 134 - Copyright © 01 LG Electronics. Inc. All right reserved.
11. STAND ALONE TEST
Only for training and service purposes