Agc; Apc; Adc - LG KF305 Service Manual

12.5 AGC

This procedure is for Rx calibration.
In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the result
window will show correction values per every power level and gain code and the same measure is
performed per every frequency.

12.6 APC

This procedure is for Tx calibration.
In this procedure you can get proper scale factor value and measured power level.

12.7 ADC

This procedure is for battery calibration.
You can get main Battery Config Table and temperature Config Table will be reset.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12. AUTO CALIBRATION
- 151 -
LGE Internal Use Only