Commissioning With Starter Or Startdrive - Siemens sinamics g120 Operating Instructions Manual

Commissioning

4.1 Commissioning with STARTER or Startdrive

4.1 Commissioning with STARTER or Startdrive
Creating a new project
Procedure
To create a new project, proceed as follows:
1. In the menu, select "Project" → "New...".
2. Specify a name of your choice for the project.
You have created a new project.
Integrating the inverter into the project
Procedure
Proceed as follows to transfer an inverter connected via USB to your project:
1. Switch on the inverter supply voltage.
2. First insert a USB cable into your PC and then into the inverter.
3. The PC operating system installs the USB driver when you are connecting the inverter
and PC together for the first time.
– Windows 7 installs the driver automatically.
– For Windows XP you must acknowledge several system messages.
4. Start the commissioning software.
5. Press the "Accessible nodes" button.
Image 4-1
Image 4-2
16
"Accessible nodes" in STARTER
"Accessible nodes" in Startdrive
Compact Operating Instructions, 01/2016, A5E37058195B AA
CU250S-2 Control Units