Frequently Required Parameters - Siemens sinamics g120 Operating Instructions Manual

Commissioning

4.3 Frequently required parameters

Description files for fieldbuses
The description files are electronic device data sheets which contain all the required
information of a higher-level controller. You can configure and operate the inverter on a
fieldbus with the appropriate description file.
Description file
Generic Station De-
scription (GSD) for
PROFIBUS
GSD Markup Language
(GSDML) for
PROFINET
Electronic Data Sheet
(EDS) for CANopen
EDS for Ethernet/IP
4.3 Frequently required parameters
Parameter Explanation
p0015 Macro drive unit
Set defaults for inputs and outputs via a macro.
r0018 Control Unit firmware version
p0096 Application class
p0100 IEC/NEMA mot stds
p0304 Rated motor voltage [V]
p0305 Rated motor current [A]
p0307 Rated motor power [kW] or [hp]
p0310 Rated motor frequency [Hz]
p0311 Rated motor speed [rpm]
p0601 Motor temperature sensor type
Terminal 14 T1 motor (+)
Terminal 15 T2 motor (-)
p0625 Motor ambient temperature during commissioning [° C]
p0640 Current limit [A]
26
Download
Internet:
(http://support.automation.siemens
.com/WW/view/en/23450835)
Internet:
(http://support.automation.siemens
.com/WW/view/en/26641490)
Internet:
(http://support.automation.siemens
.com/WW/view/en/48351511)
Internet:
(http://support.automation.siemens
.com/WW/view/en/78026217)
0: Expert
1: Standard Drive Control
2: Dynamic Drive Control
0: Europe 50 [Hz]
1: NEMA motor (60 Hz, US units)
2: NEMA motor (60 Hz, SI units)
0: No sensor (factory setting)
1: PTC (→ P0604)
Alternative to download
GSD and GSDML are saved in the
inverter. The inverter writes its GSD or
GSDML to the memory card once you
insert this card in the inverter and set
p0804 = 12. You can then transfer the
file to your programming device or PC
using the memory card.
---
---
2: KTY84 (→ P0604)
4: Bimetal
Compact Operating Instructions, 01/2016, A5E37058195B AA
CU250S-2 Control Units