Connecting The Local Console Switch; Remote Access Key - HP G3 KVM User Manual

Item
12

Connecting the local console switch

To connect the local console switch:
Connect the local keyboard, video, and mouse to the console switch.
1.
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends
from the storage system.
Plug the console switch power cord into a power source.
2.
The system health LED
Switch boots up. When the system health LED is solid green, the KVM Console Switch is
operational.
Power on the monitor.
3.
The following figure shows one possible configuration for the console switch system.
Item Description
Local console
1
Console switch
2

Remote access key

The optional USB RAK provides the following features:
•
KVM remote access
Description
LAN port
("Console switch components" on page 14) flashes when the KVM Console
Installing the HPE G3 KVM Console Switch 15