Mouse Settings; Cursor Type - HP G3 KVM User Manual

Leaving the noise threshold at zero triggers constant video refresh, resulting in high network usage and a
flickering video. Hewlett Packard Enterprise recommends setting the noise threshold at the highest level
that allows efficient system performance while still recovering pixel colors over which the mouse cursor
travels.
When adjusting the noise threshold, use the slider bar for large adjustments and the plus (+) and minus (-)
buttons at the ends of the slider bar for fine tuning.

Mouse settings

The Video Viewer window mouse options affect cursor type, cursor mode, scaling, alignment, and
resetting. Mouse settings are per-device settings.
If the device does not support the ability to disconnect and reconnect the mouse, then the mouse is
disabled and the device must be rebooted.

Cursor type

The Video Viewer window offers different appearance choices for the local mouse cursor, including no
cursor or the default cursor.
In Single Cursor mode, the local (second) cursor display in the Video Viewer window is not shown; only
the target device mouse pointer is visible. The mouse movements that appear are the target device
remote cursor movements. Use Single Cursor mode when you do not need the local cursor.
Number
1
2
Description
Remote cursor
Local cursor
Managing remote servers through the Video Session Viewer 63