Accessing The Keyboard Dialog Box; Selecting The Keyboard Language; Setting Up A Scan Pattern - HP G3 KVM User Manual

Accessing the Keyboard dialog box

From the Main dialog box
Keyboard dialog box appears.

Selecting the keyboard language

From the Keyboard dialog box
1.
keyboard country code. A Keyboard Warning appears.
Click OK.
2.

Setting up a scan pattern

In Scan mode
scans port to port (server to server).You can select up to 16 servers from a list of all servers attached to
the HPE G3 KVM Console Switch. You can display the list by either server name or EID number by
clicking the appropriate button. Selecting the checkbox beside each server to be added to the scan list
creates the scan list. The creation of a scan list does not start Scan mode. You must enable Scan mode
through the Scan Enable checkbox on the Commands dialog box
on page 40).
("Accessing the Main dialog
("Accessing the Keyboard dialog
("Activating Scan mode" on page 38), the HPE G3 KVM Console Switch automatically
box" on page 22), click Setup>Keyboard. The
box" on page 36), select the
("Accessing the Commands dialog box"
Local port operation 36