Control; On And Off; Operation Settings; Set The Operation Mode - Fujitsu UTY-RNRYZ1 Operating Manual

2 CONTROL

2-1 On and Off

(1) Press the [On/Off] button.
Mode Set Temp.
26.0
Cool
On/Off button
The LED lamp remains lit while the indoor unit is operat-
ing.
Note
The On/OFF button cannot be operated at screens other
than the monitor mode screen.

2-2 Operation Settings

2-2-1 Set the Operation Mode

(1) Touch the [Mode] on the monitor mode screen.
(2) "Mode" screen is displayed. Select the operation mode.
(1)
Mode Set Temp.
26.0
Cool
°C
Status
Notes
• Only selectable modes are displayed. The selectable
modes may be different depending on the system con-
figuration and operation status. Refer to [4.OPERATION
TIPS]→[4-1 Selectable modes].
• When the "Fan" is selected, the
temperature cannot be set.
• When "Auto" is selected at "Master Indoor Unit", "(Auto)"
is displayed at the monitor mode screen of Slave Indoor
Unit.
• When the operation mode is switched in a heat recovery
system, operation preparations may take some time, but
this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
En-7
Fri 10:00AM
Fan
Auto
°C
LED lamp
Status Menu
(2)
Mode
Fri 10:00AM
Fan
Cool Dry
Auto
Auto Fan
Cancel
Menu
Mode Set Temp.
Fan

2-2-2 Set the Temperature

(1) Touch the [Set Temp.] on the monitor mode screen.
(2) "Set Temp." screen is displayed. Adjust the room tem-
perature with the [ ] or [ ].
(1)
Mode
Cool
Notes
• The settable temperature range is different depend-
ing on the operation mode. Refer to [4 OPERATION
TIPS]→[4-3 Selectable Temperature Range].
• When the "Set Temp. Range Setting" is set, the select-
able temperature conforms to the setting. Refer to [3
SETTING] → [3-5 Special Setting] → [3-5-3 Set Temp.
Range Setting].
(3) When the [OK] is touched, the display returns to the
monitor mode screen.

2-2-3 Set the Fan Speed

(1) Touch the [Fan] on the monitor mode screen.
(2) "Fan" screen is displayed. Select the fan speed with the
[ ] or [ ].
(1)
Mode
Cool
Heat
(3) When the [OK] is touched, the display returns to the
OK
monitor mode screen.
Fri 10:00AM
Fan
Auto
Status Menu
(2)
Set Temp.
Fri 10:00AM
Set Temp. Fan
26.0 26.0
Auto
°C
Status Menu
(2)
Fan
Fri 10:00AM
Set Temp. Fan
26.0
Auto
°C
Status Menu
°C
Cancel OK
Auto
Cancel OK