Display Item Setting; Maintenance (For Administrator) - Fujitsu UTY-RNRYZ1 Operating Manual

(6) When password request item to be set or cleared is
touched, each setting screen is displayed.
(7) Touch the [On] or [Off].
(Example "On Timer" screen)
When the [OK] is touched, the
display returns to the "Change
Setting" screen.
Apply the setting.
(8) When setting is complete,
touch the [OK] on the "Change
Setting" screen.
(Example Page 1/4)
After the setting change screen is displayed, the display
returns to the "Password Setting" screen.
(9) When the [Back] on the
"Password Setting" screen is
touched, the display returns to
the "Initial Setting" screen.

3-8-7 Display Item Setting

(1) Touch the [Display Item Set-
ting] on the "Initial Setting"
screen.
Filter Sign visible/invisible
(2) "Display Item Setting" screen is displayed. Touch the
[Filter Sign] on the "Display Item Setting" screen.
(3) "Filter Sign" screen is displayed. Touch the [Visible] or
[Invisible].
(2)
Display Item Setting
Filter Sign [Visible]
Room Temp. [Invisible]
Cancel OK
When the [OK] is touched, the display returns to the
"Display Item Setting" screen.
Room Temp. visible/invisible
(4) Touch the [Room Temp.] on the "Display Item Setting"
screen.
(5) "Room Temp." screen is displayed. Select the [Visible]
or [Invisible].
(4)
Display Item Setting
Filter Sign [Visible]
Room Temp. [Invisible]
Cancel OK
When the [OK] is touched, the display returns to the
"Display Item Setting" screen.
On Timer
On
Off
Cancel OK
Change Setting
Page 1/ 4
On Timer [Off]
Off Timer [Off]
Auto Off Timer [On]
Next
Cancel OK
Page
Password Setting
Change Password
Change Setting
Back
Initial Setting
Page 2/ 3
R.C. Sensor Master Indoor
Setting Unit Setting
Display Item
Password Setting
Setting
Previous Next
Back
Page Page
(3)
Filter Sign
Visible
Invisible
Cancel OK
(5)
Room Temp.
Visible
Invisible
Cancel OK
Apply the setting.
(6) When the setting is complete,
touch the [OK] on the "Display
Item Setting" screen.
After the setting change
screen is displayed, the
display returns to the "Initial
Setting" screen.

3-9 Maintenance (for administrator)

Verification, operation, and setting for administrator informa-
tion are performed.
(1) Touch the [Maintenance] on the "Main Menu" screen.
(2) When "Password Verification" screen is displayed, enter
the Password (or Installer Password) and touch [OK].
(1)
Main Menu
Page 2/ 2
Summer Time
Preference
Setting
Initial Setting Maintenance
Previous
Monitor
Page
(3) If the password is entered correctly, the "Maintenance"
screen is displayed. The screen has 3 pages which are
switched by touching the [Next Page] or [Previous Page].
Maintenance
Page 1/ 3
Setting
Error History
Status List
Filter Sign
Version
Reset
Next
Back
Page
Maintenance
Page 3/ 3
Installer Password
Initialization
Change
Previous
Back
Page
Verification, operation, and setting of the following con-
tents are performed. (♦: for installer)
(*: Items that indoor unit does not support are not dis-
played.)
• Error History:
The error history can be verified/cleared.
• Setting Status List:
The status of each setting can be verified as a list.
• Filter Sign Reset*:
After the indoor unit filter is cleaned, the filter sign can
be reset.
• Version:
The software version No. of this unit can be verified.
• Test Run ♦
• R.C. Address Setting ♦
• Indoor Unit Address Verification ♦
• Function Setting ♦
• Installer Password Change ♦
• Initialization ♦
When the [Back] is touched at settings other than initial-
ization, the display returns to the "Main Menu" screen.
When initialization is performed, the setting screen at
initial starting is displayed.
Display Item Setting
Filter Sign [Visible]
Room Temp. [Visible]
Cancel OK
(2)
Password Verification
Enter Current Password
0 1 2 3 4
CL
5 6 7 8 9
Cancel OK
Maintenance
Page 2/ 3
R.C. Address
Test Run
Setting
I.U. Address
Function Setting
Verification
Previous Next
Back
Page Page
En-20