1 MONITOR
1-1 Monitor
1-1-1 Monitor mode screen
Monitor mode screen is the home screen of this unit.
(a)
(d)
(i)
(b)
Office
Fri 10:00AM
Set Temp.
Mode
Fan
26.0
(i)
(e)
Cool
Auto
°C
(c)
26.0°C
Room Temp.
(f)
Status
Menu
(i)
(h)
(g)
(a) R.C. group name:
Name of the remote controller group to which this unit is
connected. Refer to [3 Setting] → [3-8 Initial Setting] →
[3-8-4 R.C.Group Name Setting].
(b) Clock:
Refer to [3 SETTING] → [3-8 Initial Setting] → [3-8-2
Date Setting].
(c) Mode:
When this is touched, the display switches to the “Mode”
screen. Refer to [2 CONTROL] → [2-2 Operation Set-
tings] → [2-2-1 Set the Operation Mode].
(d) Set temp.:
When this is touched, the display switches to the tem-
perature setting screen. Refer to [2 CONTROL] → [2-2
Operation Settings] → [2-2-2 Set the Temperature].
(e) Fan:
When this is touched, the display switches to the fan
speed setting screen. Refer to [2 CONTROL] → [2-2
Operation Settings] → [2-2-3 Set the Fan Speed].
(f)
Room temp.:
The ambient temperature sensed by this unit is dis-
played. Refer to [3 SETTING] → [3-8 Initial Setting] →
[3-8-7 Display Item Setting].
(g) Menu:
When this is touched, the display switches to the “Menu”
screen. Refer to [3 SETTING].
(h) Status:
When this is touched, the display switches to the “Status”
screen. Refer to [1-1-2 Status display].
(i)
Status icons:
An error occurred. Refer to [1-1-2 Status display] →
< Error Information screen >.
Operation from this unit is prohibited by the Central
Controller. Refer to [1-1-2 Status display].
Mode mismatch. The mode which cannot operate
simultaneously is selected. Refer to [1-1-2 Status
display].
The On Timer, Off Timer, or Auto Off Timer is set.
Refer to [3 SETTING] → [3-3 Timer Setting].
The weekly timer is set. Refer to [3 SETTING] →
[3-4 Weekly Timer Setting].
The set temperature automatic return setting is set.
Refer to [3 SETTING] → [3-5 Special Setting] →
[3-5-2 Set Temp. Auto Return].
En-5