Control; On And Off; Operation Settings; Set The Operation Mode - Fujitsu Airstage UTY-RNRY Operating Manual

Wired remote controller
Hide thumbs

Advertisement

Table of Contents

2 CONTROL

2-1 On and Off

(1) Press the [On/Off] button.
Mode
Set Temp.
26.0
26.0
Cool
On/Off button
The LED lamp remains lit while the indoor unit is operat-
ing.
Note
The On/OFF button cannot be operated at screens other
than the Monitor Mode Screen.

2-2 Operation Settings

2-2-1 Set the Operation Mode

(1) Touch the [Mode] on the Monitor Mode Screen.
Mode
Cool
(2) "Mode" screen is displayed. Select the operation mode.
Mode
Cool
Auto
Notes
• Only selectable modes are displayed. The selectable
modes may be different depending on the system con-
fi guration and operation status. Refer to [4.OPERATION
TIPS]→[4-1 Selectable modes].
• When the [Fan] was set, the temperature cannot be set.
Mode
Fan
• When "Auto" is selected at "Master Indoor Unit", "(Auto)"
is displayed at the Monitor Mode Screen of Slave Indoor
Unit.
• When the operation mode is switched in a heat recovery
system, operation preparations may take some time, but
this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
Monitor Mode Screen.
En-3
Fri 10:00AM
Fan
Auto
°C °C
LED lamp
Status
Menu
Fri 10:00AM
Set Temp.
Fan
26.0
26.0
Auto
°C °C
Status
Menu
Dry
Heat
Fan
Cancel
OK
Fri 10:00AM
Set Temp.
Fan
Auto
Status
Menu

2-2-2 Set the Temperature

(1) Touch the [Set Temp.] on the Monitor Mode Screen.
Mode
Cool
(2) "Set Temp." screen is displayed. Adjust the room tem-
perature with the [ ] or [ ].
Set Temp.
26.0
26.0
Cancel
Notes
• The settable temperature range is different depending
on the operation mode and indoor unit settings.
• When set temperature range is set, conforms to the set-
ting.
(3) When the [OK] is touched, the display returns to the
Monitor Mode Screen.

2-2-3 Set the Fan Speed

(1) Touch the [Fan] on the Monitor Mode Screen.
Mode
Cool
(2) "Fan" screen is displayed. Select the fan speed.
Fan
High
Auto
Cancel
(3) When the [OK] is touched, the display returns to the
Monitor Mode Screen.
Fri 10:00AM
Set Temp.
Fan
26.0
26.0
Auto
°C °C
Status
Menu
°C °C
OK
Fri 10:00AM
Set Temp.
Fan
26.0
26.0
Auto
°C °C
Status
Menu
Med
Low
OK

Advertisement

Table of Contents
loading

  Also See for Fujitsu Airstage UTY-RNRY

This manual is also suitable for:

Airstage uty-rnrg

Table of Contents