Omd Maintenance; How To Get Diagnostic Information - SEH OMD User Manual

OMD Maintenance

How to get Diagnostic Information

Detailled information about the OMD settings can be found on the Diagnostic
page.
Proceed as follows:
1. Click Configuration.
2. Click Diagnostic.
The diagnostic information is shown.
Tabelle: Diagnostic Parameter
Parameter
Default name
Host name
Date
Uptime
Serial number
Software version
Firmware version
Hardware version
Hardware address
IP address
Netmask
Gateway
User Manual
s
Description
Board
Default name of the OMD
(set by the manufacturer)
Host name of the OMD (set by the administrator)
Current date
Period of time during which the OMD is
operational
Serial number of the OMD
(set by the manufacturer)
Release number of the software
Release number of the firmware
Release number of the hardware
Network
Hardware address of the OMD (set by the
manufacturer)
IP address of the OMD
Netmask
IP address of the gateway used to access other
networks or subnets. This enables the OMD to
communicate with devices on other subnets.
[en] 23