SEH OMD User Manual page 13

3. Select 'Manual' via
IP Address:
000.000.000.000
4. Enter the IP address.
Use to navigate to individual numerical values within the IP address.
Change individual numerical values via
5. Press to confirm. The display shows:
Netmask:
000.000.000.000
6. Enter the netmask.
7. Press to confirm. The display shows:
Gateway:
000.000.000.000
8. Enter the gateway.
9. Press to confirm. The display shows:
> Apply
< Back
10. Press to confirm. The display shows:
Applying Network
Settings ...
The settings are saved.
Setting TCP/IP parameters automatically (DHCP)
In order to assign TCP/IP parameters automatically, an active DHCP server must
be integrated into the network.
Use the navigation keys on the panel interface to set TCP/IP parameters via DHCP.
Proceed as follows:
1. Press . The display shows:
IP Setup
Cancel
User Manual
or and press to confirm. The display shows:
>
<
.
[en] 13