OMD Network Settings
In order to work with the OMD Host, date and TCP/IP parameters must be set.
What information do you need?
'How to assign TCP/IP Parameters to the OMD?'
'How to set a Host Name'
'How to set DNS'
'How to set Date and Time'
How to assign TCP/IP Parameters to the OMD?
The TCP/IP parameter can be set in different ways. You can assign the TCP/IP
parameter manually or have it assigned automatically via DHCP (Dynamic Host
Configuration Protocol). The manually assignment is default. You can set the TCP/
IP parameter via the panel interface or the OMD Homepage.
Before using the OMD Homepage you have to set the TCP/IP Parameters via the
panel interface at first.
What do you want to do?
'Setting TCP/IP parameters manually'
'Setting TCP/IP parameters automatically (DHCP)'
'Setting TCP/IP parameters via the OMD Homepage'
Setting TCP/IP parameters manually
Use the navigation keys on the panel interface to assign the TCP/IP parameter
manually.
Proceed as follows:
1. Press
. The display shows:
IP Setup
Cancel
2. Select .
The display shows the current IP configuration ('Manual' or 'DHCP'):
IP Configuration
Manual
12
15
15
16
>
<
12
[en]
12
13
14
User Manual