How To Set A Host Name; How To Set Dns - SEH OMD User Manual

How to set a Host Name

You can set a host name for the OMD. The host name and the IP address are
displayed at the top left side of the browser window.
Proceed as follows:
1. Click Configuration.
2. Click Board Settings.
3. Enter the Host name (max. 256 characters).
4. Click Set.
The settings are saved.

How to set DNS

DNS is a service that translates domain names into IP addresses. Using DNS,
names can be assigned to IP addresses and vice versa. In order to use this
functionality, specify the primary DNS server by its IP address.
Proceed as follows:
1. Click Configuration.
2. Click DNS.
3. Enter the data; see Table: DNS Parameters.
4. Click Set.
The settings are saved.
Tabelle: DNS Parameters
Parameter
Domain name
Primary DNS server
Secondary DNS
server
Domain
search list
User Manual
Description
Domain name of an existing DNS domain
(e.g. company.de)
IP address of the primary DNS server
(e.g. 192.168.0.21)
IP address of the secondary DNS server. (The secondary DNS
server is used if the first one is not available.)
Suffixes for the domain search list separated by blanks
(e.g. soft.seh.de)
[en] 15